|Modbus RTU Serial Gateway|
The Anybus Communicator Gateway for Modbus RTU is an external DIN-rail mounted gateway which provides Modbus RTU slave network connectivity on one side and a configurable serial interface on the lower side, e.g. Modbus RTU master.
This gateway can thus work as a data concentrator on a Modbus network being Modbus RTU master on one side and a Modbus RTU slave on the other side.
In the sub network side it has serial protocol support for Master Mode and Generic Data Mode which is both fully configurable through the Anybus Configuration Manager for Windows and the configuration port on the Anybus Communicator. Modbus RTU master is easily configured using built in macros or wizards.
Other protocols can be implemented by HMS on request.
The delivery comes complete with a DSUB connector with screw terminals for the serial sub-network, CD with Configuration Software and User Manuals, RS232 Configuration Cable and a short Installation Leaflet for the electrical installation.
|Multi-drop to up to 31 nodes|
|CE, UL & cUL marked|
|DIN-rail mountable - PE via DIN-rail|
|Max 512 bytes of Input data and 512 bytes of Output data|
|Sub-network RS232/422/485 selection via software|
|Modbus RTU slave side RS232/485 selection with DIP-switch|
|Supports Modbus RTU Master mode, Generic Data mode and DF1 mode on Sub network side|
|Anybus Configuration Manager for easy configuration|
|Size:||120 mm x 75 mm x 27 mm|
|Power Supply:||24 VDC|
|Current Consump:||max 300mA|
|I/O Input:||Max 512 bytes|
|I/O Output:||Max 512 bytes|
|Config Method:||Anybus Configuration Manager for Windows|
|Appl Interface:||RS232, RS422, RS485 on sub network|
|Included accessories:||CD with software and User Manuals, Configuration Cable RS232, DSUB with screw terminals for Sub-Network, Installation Leaflet.|
|Fieldbus side Interf:||RS232 or RS485 selectable with DIP-switch|
|Galvanic isolation:||Standard for both bus side and serial side|