|PROFINET IO interface with IRT functions and Fibre Optic connectors|
The embedded Anybus-S PROFINET interface is a complete PROFINET solution for a PROFINET IO device with IRT. All analog and digital components that are needed for a complete PROFINET IO interface with Isochronous-real time (IRT) are mounted on the module. The module is based on the Siemens PROFINET IO software technology for IRT and uses the Ertec 200 ASIC, providing integrated switch functionality.
The module provides two SC-RJ Fibre Optic connectors and allows installations in line or ring topology.
The interface to the electronics of the automation device is based on a 2k Dualport RAM. This interface is standardized in hardware and software and identical in functionality with all other Anybus-S modules.
The PROFINET module works as a I/O-Device on the PROFINET network. The module support up to 220 bytes of IO for both Input and Output data. The module baud rate is 100Mbit/s (full duplex). Four LEDs will continuously indicate the actual PROFINET status and eventually error messages. The module also supports the normal PROFINET Alarm functionality. The module complies PROFINET conformance Class C.
The PROFINET IO module also support functions like Webserver and FTP functions. The IT functions can be used simultaneously with the PROFINET communication.
The Anybus-S modules for PROFINET IRT have been conformance tested in accordance to the green automation initiative of the automotive industry – PROFIenergy. PROFIenergy is a standard for saving energy in industrial devices. For example, it specifies how equipment should be switched off during idle times and unexpected pauses.
The integrated profile server handles the PROFIenergy commands and parameters and provides a standardized hardware and software interface towards the electronics of the automation device. This new functionality with built-in software of the profile server is available from software version 3.20.
|PROFINET I/O device according to conformance Class C|
|Integrated 2-port switch|
|Support for PROFINET IRT Real Time functionality|
|Max 220/220 byte IO data IN/OUT|
|Max 2048 bytes acyclic Parameter data In DPRAM/Extended memory|
|Parallel 2k Byte Dual Port RAM Interface|
|Baud rate 100 Mbit/s|
|2 x SC-RJ Fibre Optic connectors|
|IT Functions: Dynamic webserver, FTP server and Email client|
|Backwards compatible with other Anybus-S modules|
|Extended Fiber Optical Diagnostic support|
|Size:||86 mm x 54 mm x 15 mm|
|Power Supply:||+5 Volt|
|Baud Rate:||100 Mbit/s, full duplex|
|I/O Input:||Max 220 bytes|
|I/O Output:||Max 220 bytes|
|Spec Version:||PROFINET Conformance Class C|
|Config Method:||GSD File for PROFINET|